Editing WIP (section)

==== Cyano Acetate ====
A cement, most people are familiar with versions of this substance as "super glue" or "c/krazy glue". Somewhere on the bottle will be the words "cyanoacrylate". It will result in glued elements that you can still split if you use a bit of violence if you need to disassemble the model in the future.

Works well on both metal and hard plastics, as well as resin, human skin and hair and...well, anything other than soft plastics. Having superglue debonder on hand is recommended as opposed to trying to tear something (like fingers) apart after a slight spill. 

* "Ultra-thin" is the general version a modeler of Warhammer or similar games is familiar with. Comes in small squeeze tubes. Dries extremely fast, within single digit seconds to minutes. Usually these fuckers will dry out, requiring you to use a sewing needle to keep the opening working which results in pressure so your first attempt to glue again will splat a large drop on your model and fingers. To avoid this, tap the bottle while pointing the top upwards to clear the glue out of the applicator, make sure the seal around where the lid goes is clear of glue, place the lid on tightly, keep them upright when not in use, and consider putting them in the fridge to prolong their lifespan and slow the drying of glue stuck in the applicator. 
* "Medium" is rarely seen, and comes similar to the Ultra-thin. This is the kind you'd get from a hardware store rather than a hobby shop. Usually comes in small metal tubes. 
* "Thick" is generally called "Gap Filler" and is used at it sounds. It comes in a variety of bottles by company. There is a short window of time between applying it and when it hardens too much to file away and make surfaces flush, so this tends to be a substance only for experienced modelers. Various Activator products are sold that will harden it faster, while Hardeners are sold to make it bond stronger.